RƠ LE AN TOÀN PHOENIX CONTACT 1017064 - PSR-PC52-1NO-1NC-24DC-SP - SAFETY RELAY 1017064 - PSR-PC52-1NO-1NC-24DC-SP - NHÀ PHÂN PHỐI PHOENIX CONTACT
Tham khảo catalog chi tiết theo đường link sau (trích nguồn https://www.phoenixcontact.com):
https://www.phoenixcontact.com
Liên hệ để có giá tốt nhất:
Mr Vũ: 0908 878 633
Mr Hoàng: 0933 441 466
Mr Di: 0933 744 776
Email: info@tienhungtech.com
sales@tienhungtech.com
| Maximum power dissipation for nominal condition |
3.8 W (ati UB = 26.4 V DC, UBD = 26.4 V DC, IL = 3 A) |
| Nominal operating mode |
100% operating factor |
| Air clearances and creepage distances between the power circuits |
| Rated insulation voltage |
250 V AC |
| Rated surge voltage/insulation |
Basic insulation 4 kV between all current paths and housing |
| Safe isolation, 6 kV reinforced insulation from (A1/A2, 24V/0V, 21/22, and TP1/TP2/TP3) to the enabling current path (L, L', LO, LO', NI, NI', N,N') |
| Supply |
| Designation |
A1/A2 |
| Rated control circuit supply voltage US |
20.4 V DC ... 26.4 V DC |
| Rated control circuit supply voltage US |
24 V DC -15 % / +10 % |
| Rated control supply current IS |
typ. 75 mA |
| Power consumption at US |
typ. 2 W (at US/UD; On state) |
| Inrush current |
max. 100 mA |
| Filter time |
2 ms (at A1-A2 in the event of voltage dips at Us) |
| max. 2 ms (at A1-A2; low test pulse width) |
| ≥ 100 ms (at A1-A2; low test pulse rate) |
| max. 17 ms (at A1-A2; high test pulse width) |
| ≥ 800 ms (at A1-A2; high test pulse rate) |
| Protective circuit |
Surge protection; 36 V suppressor diode |
| Reverse polarity protection |
| Supply |
| Designation |
24V/0V |
| Diagnostic supply voltage UD |
24 V DC -20 % / +25 % |
| Input current at UD |
35 mA (at UD = 24 V) |
| 45 mA (at UD = 19 V) |
| 25 mA (at UD = 30 V) |
| Inrush current at UD |
1.5 A (Δt < 10 µs) |
| Power consumption at UD |
typ. 0.9 W (at UD; Off state) |
| Protective circuit |
Surge protection; 33 V suppressor diode |
| Reverse polarity protection |
