RƠ LE AN TOÀN PHOENIX CONTACT 2702522 - PSR-PC51-1NO-1NC-24DC-SC - SAFETY RELAY 2702522 - PSR-PC51-1NO-1NC-24DC-SC - NHÀ PHÂN PHỐI PHOENIX CONTACT
Rơle khớp nối để cách ly điện và thích ứng nguồn cho các ứng dụng SIL 3 F&G, nhu cầu thấp, chẩn đoán tải ở trạng thái Tắt và Bật khi đứt dây và ngắn mạch, 1 đường dẫn dòng điện cho phép, bộ lọc xung thử nghiệm, khối đầu cực vít cắm, chiều rộng: 17,5mm
Maximum power dissipation for nominal condition |
3.8 W (ati UB = 26.4 V DC, UBD = 26.4 V DC, IL = 3 A) |
Nominal operating mode |
100% operating factor |
Air clearances and creepage distances between the power circuits |
Rated insulation voltage |
250 V AC |
Rated surge voltage/insulation |
Basic insulation 4 kV between all current paths and housing |
Safe isolation, 6 kV reinforced insulation from (A1/A2, 24V/0V, 21/22, and TP1/TP2/TP3) to the enabling current path (L, L', LO, LO', NI, NI', N,N') |
Supply |
Designation |
A1/A2 |
Rated control circuit supply voltage US |
20.4 V DC ... 26.4 V DC |
Rated control circuit supply voltage US |
24 V DC -15 % / +10 % |
Rated control supply current IS |
typ. 75 mA |
Power consumption at US |
typ. 2 W (at US/UD; On state) |
Inrush current |
max. 100 mA |
Filter time |
2 ms (at A1-A2 in the event of voltage dips at Us) |
max. 2 ms (at A1-A2; low test pulse width) |
≥ 100 ms (at A1-A2; low test pulse rate) |
max. 17 ms (at A1-A2; high test pulse width) |
≥ 800 ms (at A1-A2; high test pulse rate) |
Protective circuit |
Surge protection; 36 V suppressor diode |
Reverse polarity protection |
Supply |
Designation |
24V/0V |
Diagnostic supply voltage UD |
24 V DC -20 % / +25 % |
Input current at UD |
35 mA (at UD = 24 V) |
45 mA (at UD = 19 V) |
25 mA (at UD = 30 V) |
Inrush current at UD |
1.5 A (Δt < 10 µs) |
Power consumption at UD |
typ. 0.9 W (at UD; Off state) |
Protective circuit |
Surge protection; 33 V suppressor diode |
Reverse polarity protection |
Tham khảo catalog chi tiết theo đường link sau (trích nguồn https://www.phoenixcontact.com):
https://www.phoenixcontact.com
Liên hệ để có giá tốt nhất:
Mr Vũ: 0908 878 633
Mr Hoàng: 0933 441 466
Mr Di: 0933 744 776
Email: info@tienhungtech.com
sales@tienhungtech.com