RƠ LE AN TOÀN PHOENIX CONTACT 2700589 - PSR-PC40-2NO-1DO-24DC-SP - SAFETY RELAY 2700589 - PSR-PC40-2NO-1DO-24DC-SP -NHÀ PHÂN PHỐI PHOENIX CONTACT
Coupling relay for SIL 3 high and low-demand applications, couples digital output signals to the I/O, 2 enabling current paths, 1 digital signal output, safe state off applications, test pulse filter, pluggable Push-in terminal block
Maximum power dissipation for nominal condition |
5.5 W (IL² = 60 A²) |
Nominal operating mode |
100% operating factor |
Air clearances and creepage distances between the power circuits |
Rated insulation voltage |
250 V AC |
Rated surge voltage/insulation |
Safe isolation, 6 kV reinforced insulation from control circuit, start circuit, signal output to the enabling current paths, 4 kV/basic insulation between the enabling current paths and between all current paths and housing |
Supply |
Designation |
A1/A2 |
Rated control circuit supply voltage US |
20.4 V DC ... 26.4 V DC |
Rated control circuit supply voltage US |
24 V DC -15 % / +10 % (A1/A2) |
Rated control supply current IS |
typ. 75 mA (depending on load M1 +100 mA) |
Power consumption at US |
typ. 1.8 W |
Inrush current |
typ. 400 mA (Δt < 100 µs at Us) |
Filter time |
max. 2 ms (at A1-A2; test pulse width) |
≥ 100 ms (at A1-A2; test pulse rate) |
Protective circuit |
Serial protection against polarity reversal; 33 V suppressor diode |
Tham khảo catalog chi tiết theo đường link sau (trích nguồn https://www.phoenixcontact.com):
https://www.phoenixcontact.com
Liên hệ để có giá tốt nhất:
Mr Vũ: 0908 878 633
Mr Hoàng: 0933 441 466
Mr Di: 0933 744 776
Email: info@tienhungtech.com
sales@tienhungtech.com