RƠ LE AN TOÀN PHOENIX CONTACT 2702095 - PSR-MC70-2NO-1DO-24DC-SP - SAFETY RELAY 2702095 - PSR-MC70-2NO-1DO-24DC-SP -NHÀ PHÂN PHỐI PHOENIX CONTACT
Safety relay for emergency stop, safety doors, light grid up to SIL 1, Cat. 1, PL e, 1- or 2-channel operation, cross-circuit detection, can be retriggered, fall back/on delay 0.2 s ... 60 s, 2 enabling current paths, US = 24 V DC, pluggable Push-in terminal block
| Maximum power dissipation for nominal condition |
3.58 W (at US = 30 V, IL² = 72 A²) |
| Nominal operating mode |
100% operating factor |
| Air clearances and creepage distances between the power circuits |
| Rated insulation voltage |
250 V AC |
| 250 V AC |
| Rated surge voltage/insulation |
Basic insulation 4 kV: between all current paths and housing
Safe isolation, reinforced insulation 6 kV:
between (A1, A2, S11, S12, S21, S22, S34, M1) and enabling current path (13/14)
between (A1, A2, S11, S12, S21, S22, S34, M1) and enabling current path (27/28)
between enabling current paths |
| Supply |
| Designation |
A1/A2 |
| Rated control circuit supply voltage US |
19.2 V DC ... 30 V DC |
| Rated control circuit supply voltage US |
24 V DC -20 % / +25 % |
| Rated control supply current IS |
typ. 50 mA |
| Power consumption at US |
typ. 1.2 W |
| Inrush current |
typ. 25 A (Δt = 10 µs at Us) |
| Filter time |
10 ms (For the logic. At A1 in the event of voltage dips at Us ) |
| Protective circuit |
Surge protection; Suppressor diode |
| Protection against polarity reversal for rated control circuit supply voltage |
| Maximum power dissipation for nominal condition |
3.58 W (at US = 30 V, IL² = 72 A²) |
| Nominal operating mode |
100% operating factor |
| Air clearances and creepage distances between the power circuits |
| Rated insulation voltage |
250 V AC |
| 250 V AC |
| Rated surge voltage/insulation |
Basic insulation 4 kV: between all current paths and housing
Safe isolation, reinforced insulation 6 kV:
between (A1, A2, S11, S12, S21, S22, S34, M1) and enabling current path (13/14)
between (A1, A2, S11, S12, S21, S22, S34, M1) and enabling current path (27/28)
between enabling current paths |
| Supply |
| Designation |
A1/A2 |
| Rated control circuit supply voltage US |
19.2 V DC ... 30 V DC |
| Rated control circuit supply voltage US |
24 V DC -20 % / +25 % |
| Rated control supply current IS |
typ. 50 mA |
| Power consumption at US |
typ. 1.2 W |
| Inrush current |
typ. 25 A (Δt = 10 µs at Us) |
| Filter time |
10 ms (For the logic. At A1 in the event of voltage dips at Us ) |
| Protective circuit |
Surge protection; Suppressor diode |
| Protection against polarity reversal for rated control circuit supply voltage |
Tham khảo catalog chi tiết theo đường link sau (trích nguồn https://www.phoenixcontact.com):
https://www.phoenixcontact.com
Liên hệ để có giá tốt nhất:
Mr Vũ: 0908 878 633
Mr Hoàng: 0933 441 466
Mr Di: 0933 744 776
Email: info@tienhungtech.com
sales@tienhungtech.com
